IBM Netfinity 3500, Руководство пользователя

Страница: 30 / 294

Input/Output Connectors
Parallel Connector: A signal cable for a parallel device, such
as a printer, connects here.
Audio Line In: This connector is used to send audio signals
from an external device (such as a CD player or stereo) to
your server so that the signals can be recorded on the hard
disk.
SCSI Connector: SCSI devices attach here. For more
information, see “Adding External SCSI Devices” on page 98,
“Attaching External Options” on page 99, and “SCSI
Connectors” on page 104.
Microphone: This connector is used to attach a microphone
to your server when you want to record voice or other
sounds on the hard disk. This connector can also be used by
speech-recognition software.
Audio Line Out: This connector is used to send audio
signals from your server to external devices, such as
stereo-powered speakers with built-in amplifiers, headphones,
multimedia keyboards, or the audio line-in jack on a stereo
system. To hear audio, you must connect one of these
external devices to the audio line-out connector on your
server.
Note: The internal speaker in your server is disabled when
an external speaker is attached to the audio line-out
connector on your server. There is no playback
capability through the internal speaker.
Ethernet Connector: An unshielded, twisted-pair (UTP) cable
with an RJ-45 connector attaches here to the 10/100 Ethernet
controller on the system board.
For more information about cables, see Appendix A,
“Ethernet Cable Specifications” on page 217.
Serial Connectors: Attach signal cables for modems or other
serial devices to the 9-pin serial connectors of serial ports 1
and 2. See “Serial Port Connectors” on page 99 for port
assignment information.
12
Netfinity 3500 User's Handbook