IBM Netfinity 3500, Руководство пользователя

Страница: 142 / 294

Running the Diagnostic Test Programs
Note: See “Diagnostic Test Programs” on page 119 for a description
of the diagnostic programs that come with your server.
To start the IBM Enhanced Diagnostics using the CD that comes
with your server, do the following:
1. Turn off your server and any attached devices.
Note: Do not press Ctrl
+
Alt
+
Del.
2. Turn on all attached devices; then, turn on your server.
3. Place the IBM Enhanced Diagnostic CD in the CD-ROM drive.
4. Select Exit Setup and follow the prompts. The diagnostics
program will load. Follow the instructions on the screen to run
the diagnostics program.
Attention:
1. When you finish running diagnostic and utility programs,
remove the CD from the CD-ROM drive and turn off the server.
2. Do not discard this CD. Store it in a safe place for later use.
Make a backup copy of the IBM Enhanced Diagnostics CD
information on a diskette. To do this:
1. Insert a blank, 3.5-inch diskette into diskette drive A.
2. Follow the previous instructions for starting the IBM Enhanced
Diagnostics CD.
3. Select the menu choice for making a backup diskette.
4. Follow the instructions on the screen.
To start the IBM Enhanced Diagnostics using your backup
diagnostic diskette, do the following:
1. Turn off your server and any attached devices.
2. Insert the IBM Enhanced Diagnostics backup diskette into
diskette drive A.
3. Turn on all attached devices; then, turn on your server.
4. Follow the instructions on the screen.
124
Netfinity 3500 User's Handbook