IBM Netfinity 3500, Руководство пользователя

Страница: 39 / 294

Using the CD-ROM Drive
Handling a CD
When handling a CD, follow these guidelines:
Ÿ
Hold the CD by its edges. Do not touch the surface.
Ÿ
To remove dust or fingerprints, wipe the CD from the center to
the outside. Wiping the CD in a circular direction might cause
loss of data.
Ÿ
Do not write or stick paper on the CD.
Ÿ
Do not scratch or mark the CD.
Ÿ
Do not place or store the CD in direct sunlight.
Ÿ
Do not use benzene, thinners, or other cleaners to clean the CD.
Ÿ
Do not drop or bend the CD.
Loading and Unloading a CD
To load and unload a CD into a CD-ROM drive:
1. Press the Eject/Load button. The tray slides out of the drive.
(Do not manually force the tray open.)
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or by gently
pushing the tray forward. When the tray is closed, the
CD-ROM drive in-use light on the front of the drive will
activate to indicate that the drive is in use.
4. To eject the CD, press the Eject/Load button. When the tray
slides out, carefully remove the CD.
5. Close the tray by pressing the Eject/Load button, or by gently
pushing the tray forward.
Notes:
1. If the tray does not slide out of the drive when you press the
Eject/Load button, insert one end of a large paper clip into the
emergency-eject hole located above and to the left of the
CD-ROM drive in-use light.
2. In some models, you might have to remove the front bezel from
the CD-ROM drive to access the emergency-eject hole.
Chapter 2. Getting Started
21