IBM Netfinity 3500, Руководство пользователя

Страница: 84 / 294

Working with Memory Modules
Installing or Removing Memory Modules
This section gives the procedure for installing memory modules. If
you want to remove a memory module, reverse the order of the
following steps.
Before you begin:
Ÿ
Read “Electrical Safety” on page 54 and “Handling
Static-Sensitive Devices” on page 55.
Ÿ
Read the documentation that comes with the option.
Ÿ
Read “Accessing the System Board” on page 58.
Notes:
1. Each memory connector contains two keys (dividers), which are
used to assure that a memory-module can be installed only in
the correct position.
2. A retaining clip at each end of the connector locks the memory
module into place.
3. For information about memory configuration, see Table 1 on
page 65.
To install a DIMM:
1. Remove the server cover (see “Preparing to Add Options” on
page 56). Table 1 on page 65.
2. Locate the memory connectors on the system board. See the
illustration at the beginning of this section.
66
Netfinity 3500 User's Handbook