IBM Netfinity 3500, Руководство пользователя

Страница: 224 / 294

Erasing Forgotten Passwords
3. Reinstall the server cover and reconnect the cables (see
“Completing the Installation” on page 113 for instructions).
4. Turn the server back on for approximately 10 seconds.
CAUTION:
Do not touch any components while power is on.
5. Turn off the server. CMOS memory is now cleared.
Note: You might not be able to turn off the power using the
power switch until POST is nearly complete. Unplug the
power cord to turn off your server.
6. Disconnect the cables, remove the server cover, and move the
jumper back to its normal position (pins 1 and 2).
7. After clearing CMOS memory, you must reconfigure the server.
After reassembling the server (see “Completing the Installation”
on page 113), use the Configuration/Setup Utility program to
reset the date and time, reset any passwords, and reconfigure
the server. For more information, see “Using the
Configuration/Setup Utility Program” on page 28.
206
Netfinity 3500 User's Handbook