IBM Netfinity 3500, Руководство пользователя

Страница: 94 / 294

Preinstallation Steps (All Bays)
Before you begin, be sure you have:
Ÿ
Read “Electrical Safety” on page 54 and “Handling
Static-Sensitive Devices” on page 55.
Ÿ
Read the documentation that comes with the option.
Ÿ
Read “Termination Requirements” on page 75.
Ÿ
Verified that you have all cables, drive trays, and any other
equipment specified in the documentation that comes with
the internal drive.
Before you can install drives in your Netfinity 3500 server, you
might need to perform certain preinstallation activities. Some of the
steps are required only during the initial installation of an option.
1. Remove the server cover (see “Preparing to Add Options” on
page 56).
2. Choose the bay in which you want to install the drive. (Refer to
Table 2 on page 71 for the drive types and sizes available for
each bay.)
3. Access the appropriate drive bays.
Notes:
a. In all models, drive bays 1 and 4 come with drives
preinstalled.
b. In some models, drive bay 6 comes with a drive
preinstalled.
c. Drive bays 2 and 3 have a bay panel and static shield
installed.
d. If you remove a drive that has removable media and you do
not intend to install a new drive immediately, reinstall the
static shield and bay panel for that bay.
To access drive bays 1 through 4, go to step 4 on page 77.
To access drive bays 5 and 6, go to step 5 on page 80.
76
Netfinity 3500 User's Handbook