IBM Netfinity 3500, Руководство пользователя

Страница: 76 / 294

Preparing to Add Options
7. If necessary, unlock the server side cover.
8. Remove the side cover by pulling out on the cover-release tab at
the rear of the side cover. Then, slide the cover toward the
front of the server and lift it off.
9. Set the door aside.
Cover-
Release
Tab
Accessing the System Board
Before you can install or remove certain options, you might need to
access the system board. For example, you might need to remove
adapters, drives, and cables that impede your access to components
on the system board. You also need to access the system board
before you can install or remove such options as adapters, memory
modules, and microprocessors, because these devices reside on the
system board.
To access the system board more easily, place the server on its side,
so that the system board is facing you, on a flat, sturdy surface,
such as a table.
Note: To see a list of the system-board components and an
illustration that shows their locations, see “System Board
Illustration” on page 203.
58
Netfinity 3500 User's Handbook