IBM Netfinity 3500, Руководство пользователя

Страница: 151 / 294

POST Messages
POST Message Description
176 The server cover has been removed.
Action: You must enter the administrator password to clear this
POST message. If the message recurs when the cover has not
been removed, have the system serviced.
186 A system board or hardware security error has been cleared.
Action: The administrator password was entered to clear POST
message 176. No further action is required.
187 The administrator password and startup (boot) sequences have
been cleared. POST message 162 will normally display also.
Action: See POST message 162
20X A failure occurred during the memory test. This error can be
caused by:
Ÿ
Incorrectly installed memory
Ÿ
A failing memory module
Ÿ
A system-board failure
Action:
1. If you just installed memory, verify that the new memory is
correct for your system, and that the memory modules are
installed properly. If the memory is not installed correctly,
reseat the memory modules. (See “Working with Memory
Modules” on page 63.) Verify that the memory modules are
configured correctly. (See Chapter 3, “Configuring Your
Server” on page 23.)
2. Run the diagnostic programs to verify the problem. (See
“Running the Diagnostic Test Programs” on page 124 for
information on running the diagnostic programs that come
with your server.)
If the problem cannot be isolated and corrected, have the system
serviced.
Chapter 5. Solving Problems
133