IBM Netfinity 3500, Руководство пользователя

Страница: 233 / 294

Setting the Administrator Password Switch
When you want to set, change, or delete an administrator password
that is protected by enhanced security, you must first unlock the
administrator password. To do this, change the setting of the
administrator password switch from Locked to Unlocked.
Before you begin:
Ÿ
Read “Electrical Safety” on page 54 and “Handling
Static-Sensitive Devices” on page 55.
Ÿ
Turn off the server and all other connected devices.
Ÿ
Disconnect all external cables attached to the server; then,
remove the server cover (see “Preparing to Add Options” on
page 56).
1. Locate the configuration switches (also known as rocker
switches) on the system board. For more information, refer to
the label inside the server, or see “System Board Illustration” on
page 203.
2. To lock or unlock the administrator password, set switch 7 as
shown in the following illustration. It might be helpful to use
the end of a small screwdriver to set the switch.
Administrator Password Locked Administrator Password Unlocked
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ON ON
OFF OFF
3. Move the switch to the ON position.
Note: You must know the administrator password to change or
delete it.
4. Set, change, or delete your password.
5. Move the switch back to the OFF position.
6. Replace the cover. Then, turn on the server.
Chapter 7. Server Records and Specifications
215