IBM Netfinity 3500, Руководство пользователя

Страница: 110 / 294

Installing Microprocessors
To install a microprocessor:
1. Remove the server cover (see “Preparing to Add Options” on
page 56).
2. If your server does not come with an air baffle, go to step 3.
If your server comes with an air baffle, remove the air baffle:
a. If cables are in the way, move them.
b. Locate the three small levers on the air baffle that protrude
through the holes on the rear of the server.
c. Press the levers down, toward the bottom, until they unlock.
d. Slide the air baffle away from the rear of the server.
e. Tilt the air baffle toward the microprocessors, and slide it
out, under the metal bar and away from the two
microprocessor/heat-sink assemblies.
f. Remove the air baffle from the server, and save it for later
use.
3. If you are installing a second microprocessor in the server, go to
step 5 on page 94.
If you are replacing an existing microprocessor, go to step 4 on
page 93.
92
Netfinity 3500 User's Handbook