IBM Netfinity 3500, Руководство пользователя

Страница: 51 / 294

Using the Configuration/Setup Utility Program
Off
The system does not prompt the user to enter the power-on
password during startup.
If you have a mouse connected to the mouse port, the
password prompt Off mode prevents the system from
detecting that a mouse is attached.
Notes:
1. The mouse and keyboard are not active until you enter
the power-on password, even if an operating system
has been installed in the server.
2. The password prompt Off mode does not support any
locally or remotely scheduled shutdowns or restarts.
Therefore, do not use a power-on wakeup or lockout
function.
3. A serial mouse is not affected by the password prompt
Off mode.
To adjust the server configuration so that the operating
system does not display an error or stop operating when
the mouse port is disabled:
If you enter a password, the keyboard will unlock, but the
mouse connected to the mouse port will remain disabled.
Password prompt Off mode is useful for network
environments that cause the server to operate unattended.
Operating System Instructions
OS/2

Do one of the following:
Ÿ
Set the CONFIG.SYS file so that the operating
system does not stop on a device-driver error. To
do this, put the command “PAUSEONERROR=NO”
near the top of the CONFIG.SYS file.
Ÿ
Remove the mouse driver statement from the
CONFIG.SYS file.
Microsoft Windows
NT Server When the mouse port disabled error message appears,
enter either your power-on or administrator password to
enable the keyboard. Then use the keyboard to put a
check mark in the
Do not display this message in the
future
check box.
Chapter 3. Configuring Your Server
33