IBM 8248-L4T, Руководство пользователя

Страница: 42 / 214

Proceed to the procedure for completing the disk drive or solid-state drive installation. For instructions,
go to “Completing the procedure” on page 27.
Installing a solid-state drive in the EDR1 PCIe storage enclosure
Complete the following steps to install a solid-state drive in the EDR1 PCIe storage enclosure:
1. With the handle in the unlocked position, align the solid-state drive with the guide rails in the
enclosure. See Figure 16 on page 27,
Note: Do not hold the drive only by the handle. Support the drive by holding the drive by its sides.
2. Slide the solid-state drive into the EDR1 PCIe storage enclosure until the drive stops.
3. Rotate the handle (A) to the locked position, as shown in Figure 16 on page 27.
4.
Install the bezel
(B)
.
Figure 15. Installing the disk drive in the 5887 disk drive enclosure
26
Disk drives or solid-state drives