HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 234 / 285

SERVICE SCHEDULE
232
35.1
Important maintenance work to be carried out by an authorized HUSABERG workshop
S1N S3N S15A S30A
Engine Change the engine oil and oil filter, clean the engine oil screen. ( p. 158) • • • •
Replace the spark plug. •
Check the valve clearance. • • •
Check the engine mounting screws for tightness. • • •
Clean the spark plug connectors and check for tightness. • • •
Check the shift lever screw for tightness. • • •
Fuel injection Check the bellows for cracks and leakage. • • •
Read out the fault memory using the HUSABERG diagnostic tool. • • •
Check the fuel hoses, SLS hoses and vent hoses for damage, correct routing
and leaks.
• • •
Clean, check and lubricate the O-ring of the fuel hose connection. • •
Check the cable harness of the throttle valve body for damage and correct
routing.
• • •
Check the fuel pressure. ( p. 62) • •
Attachments Check the cooling system for leakage. • • •
Check the antifreeze and coolant level. ( p. 154) • • •
Check the exhaust system for leakage and looseness. • •
Check the Bowden cables for damage, smooth operation and routing with-
out sharp bends.
• • •
Check the fluid level of the hydraulic clutch. ( p. 152) • • •
Clean the air filter. ( p. 57) • • •
Check the cables for damage and routing without sharp bends. • •
Check the functioning of the electrical equipment. • • •
Adjust the beam width of the headlight. (FE EU, FE AUS) ( p. 89) • •
Brakes Check the front brake linings. ( p. 80) • • •
Check the rear brake linings. ( p. 84) • • •
Check the brake disks. ( p. 67) • • •
Check the front brake fluid level. ( p. 79) • • •
Check the rear brake fluid level. ( p. 83) • • •
Check the brake lines for damage and leakage. • • •
Check the free travel of the hand brake lever. ( p. 78) • • •
Check the free travel of the foot brake lever. ( p. 82) • • •
Check the brake system function. • • •
Check the screws and guide bolts of the brake system for tightness. • • •
Chassis Check the shock absorber and fork for leakage and functioning. • • •
Clean the dust boots of the fork legs. ( p. 11) • •
Bleed the fork legs. ( p. 11) • •
Check the swingarm bearing. • •
Check the play of the steering head bearing. ( p. 29) • • •
Check all screws to see if they are tight. • • •
Wheels Check the spoke tension. ( p. 72) • • •
Check the rim run-out. • • •
Check the tire condition. ( p. 66) • • •
Check the tire air pressure. ( p. 66) • • •
Check the chain wear. ( p. 70) • • •
Check the chain tension. ( p. 69) • • •
Clean the chain. ( p. 71) • • •
Check the wheel bearing for play. • • •
Clean and grease the adjusting screws of the chain adjuster. • • •
S1N: once after one operating hour
S3N: once after three operating hours