HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 99 / 285

30/ENGINE
97
300712-10
–
Position the clutch slave cylinder.
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the shift lever.
–
Mount and tighten screw

.
Guideline
Screw, shift lever M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
300692-11
–
Position the engine sprocket cover.
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M8 25 Nm
(18.4 lbf ft)
300678-12
–
Position the exhaust manifold.
–
Mount screw

but do not tighten it yet.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
300677-12
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M8 25 Nm
(18.4 lbf ft)
–
Tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the exhaust clamp.
–
Tighten screw

.
Guideline
Screw, exhaust clamp on manifold M8 8 Nm (5.9 lbf ft)
300676-12
–
Plug in connector

of the lambda sensor.
–
Route the cable so it is tension-free and secure it with cable binders.
–
Install the main silencer. ( p. 54)
–
Install the throttle valve body. ( p. 162)
–
Connect the negative cable of the battery. ( p. 73)