HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 37 / 285

04/SHOCK ABSORBER, SWINGARM
35
7.11
Performing a shock absorber service
Condition
The shock absorber has been removed.
200989-01
–
Remove the spring. ( p. 35)
–
Disassemble the shock absorber. ( p. 36)
–
Disassemble the piston rod. ( p. 37)
–
Disassemble the seal ring retainer. ( p. 38)
–
Check the shock absorber. ( p. 39)
–
Disassemble the rebound adjuster. ( p. 40)
–
Remove the heim joint. ( p. 41)
–
Install the heim joint. ( p. 41)
–
Assemble the rebound adjuster. ( p. 42)
–
Assemble the seal ring retainer. ( p. 43)
–
Assemble the piston rod. ( p. 43)
–
Assemble the shock absorber. ( p. 45)
–
Install the spring. ( p. 50)
7.12
Removing the spring
Condition
The shock absorber has been demounted.
–
Clamp the shock absorber in a bench vise using soft jaws.
–
Measure and note the spring length in its pre-compressed state.
200750-10
–
Unscrew screw

.
–
Rotate the adjusting ring until the spring is no longer under tension.
Hook wrench (T106S) ( p. 274)
200751-10
–
Remove O-ring

.
–
Remove spring retainer

and intermediate washer

.
–
Remove the spring.
200752-10
–
Rotate adjusting ring

with the intermediate washer toward the top.
Info
Both cannot be taken off yet.