HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 26 / 285

01/FORK, TRIPLE CLAMP
24
200724-10
–
Position the support ring.
–
Hold the seal ring with the shorter shoulder of the special tool.
Assembly tool (T1402S) ( p. 276)
–
Press the outer tube all the way in.
200742-11
–
Mount lock ring

.
Info
The lock ring must audibly lock into place.
200741-11
–
Mount dust boot

.
–
Mount fork protector ring

.
200725-11
–
Mount adjustment tube

of the rebound damping in the cartridge.
The adjustment tube extends 5 mm out from the cartridge and can be pressed
inward against the spring force.
The adjustment tube extends more than 7 mm out from the cartridge and can-
not be pressed inward against the spring force.
–
Screw on fluid barrier

to the stop.
Info
The fluid barrier must be screwed on tightly against the stop. Do not use any
tools.
–
Mount the special tool on the cartridge.
Gripping tool (T14026S1) ( p. 276)
Info
The special tool must be used in order that the adjustment tube is not
raised. Otherwise, oil will reach the piston rod.
200726-10
–
Push the cartridge into the inner tube.
–
Mount and tighten compression damping fitting

.
Guideline
Compression damping fitting M29x1 35 Nm
(25.8 lbf ft)
Info
If the cartridge turns as well, press the piston rod slightly to the side.