HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 132 / 285

30/ENGINE - WORK ON THE INDIVIDUAL PARTS
130
19.39
Checking the clutch
0 0 1 1
0 0 3 3
0 0 2 2
0 0 5 5
0 0 8 8
0 0 bk bk
0 0 9 9
0 0 6 6
0 0 7 7
0 0 bn bn
0 0 4 4
bl bl
bm bm
300524-01
–
Check the pressure piece

for damage and wear.
» If there is damage or wear:
–
Change the pressure piece.
–
Check axial bearing

for damage and wear.
» If there is damage or wear:
–
Change the axial bearing.
–
Place push rod

on a level surface and check for run-out.
» If there is run-out:
–
Change the push rod.
–
Check the length of clutch springs

.
Clutch spring - length (All 450 models) 43.00… 44.03 mm (1.6929…
1.7335 in)
Clutch spring - length (All 570 models) 45.10… 46.10 mm (1.7756…
1.815 in)
» If the clutch spring length is less than the specified value:
–
Change all clutch springs.
–
Check the thrust face of pressure cap

for damage and wear.
» If there is damage or wear:
–
Change the pressure cap.
–
Check the contact surfaces of the clutch facing disks in outer clutch hub

for
wear.
Outer clutch hub - clutch facing disks
contact surface
≤
0.5 mm (
≤
0.02 in)
» If the contact surface exhibits significant wear:
–
Change the clutch facing disks and outer clutch hub.
–
Check needle bearing

and collar sleeve

for damage and wear.
» If there is damage or wear:
–
Change the needle bearing and collar sleeve.
–
Check the intermediate clutch disks

for damage and wear.
» If the intermediate clutch disks are not even or exhibit pitting:
–
Change all intermediate clutch disks.
–
Check clutch facing disks

and

for discoloration and scoring.
» If there is discoloration or scoring:
–
Change all clutch facing disks.
–
Check the thickness of clutch facing disks

and

.
Clutch facing disk - thickness
Outer 2.6… 2.7 mm (0.102… 0.106 in)
Innermost 2.9… 3.0 mm (0.114… 0.118 in)
» If the clutch facing disk does not meet specifications:
–
Change all clutch facing disks.
–
Check retention ring and support ring

for damage and wear.
» If there is damage or wear:
–
Change the pretension ring and support ring.
–
Check the inner clutch hub

for damage and wear.
» If there is damage or wear:
–
Change the inner clutch hub.