HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 73 / 285

10/REAR WHEEL
71
13.6
Checking the rear sprocket/engine sprocket for wear
400227-01
–
Check the rear sprocket/engine sprocket for wear.
» If the rear sprocket/engine sprocket are worn:
–
Replace the rear sprocket/engine sprocket.
Info
When fitting the chain joint, always make sure that the closed side
of the joint faces forward (riding direction).
The engine sprocket, rear sprocket and chain should always be
replaced together.
–
Check the chain guide for tightness and wear.
13.7
Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 71)
13.8
Cleaning the chain
Warning
Danger of accidents Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents
Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The service life of the chain depends largely on its maintenance.
–
Clean the chain regularly and then treat with chain spray.
Chain cleaner ( p. 265)
Offroad chain spray ( p. 266)