HUSABERG FE 450 AUS, Руководство по ремонту

Страница: 69 / 285

09/FRONT WHEEL
67
Info
The tire manufacture date is usually included in the tire identification num-
ber and comprises the last four digits of the
DOT code. The first two digits
indicate the week of manufacture and the last two digits the year of manu-
facture.
HUSABERG recommends replacing the tires after five years at the latest,
regardless of the actual wear.
» If the tires are older than five years:
–
Change the tire.
12.5
Checking the brake disks
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay.
A A
400257-10
–
Check the thickness of the front and rear brake disks at several places on the disk
to see if it conforms to measurement

.
Info
Wear reduces the thickness of the brake disk around the area used by the
brake linings.
Brake discs - wear limit
Front 2.5 mm (0.098 in)
Rear 3.5 mm (0.138 in)
» If the brake disk thickness is less than the specified value:
–
Change the brake disk.
–
Check the front and rear brake disks for damage, cracking and deformation.
» If the brake disk exhibits damage, cracking or deformation:
–
Change the brake disk.