HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 155 / 300

5-5
Frame Servicing
(1) SPRING SEAT STOPPER (2) FORK BOLT
Pull the fork spring seat stopper down to access the
cut-out in the damping adjuster with an 17 mm open
end wrench.
Hold the damper rod and remove the fork bolt from
the rebound damping adjuster.
(1) SPRING SEAT STOPPER (2) SPRING COLLAR
(3) JOINT PLATE (4) FORK SPRING
(5) LOCK NUT (6) REBOUND ADJUSTER
(1) DAMPER ROD
(1) AXLE HOLDER
Hold the axle holder in a vise protected with a piece
of wood or soft jaws to avoid damage.
Do not overtighten.
Loosen and remove the fork bottom socket bolt and
sealing washer.
If the socket bolt turns together with the fork
damper, temporarily install the fork spring, spacer
and fork bolt.
Remove the following:
– spring seat stopper
– spring collar
– spring joint plate
– fork spring
Pour out the fork fluid.
Empty the fork fluid from the fork damper by pump-
ing the damper rod 8–10 times.
(2)
(1)
(1)
(2)
(3)
(4)
(6)
(5)
(1)
(1)