HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 160 / 300

5-10
Frame Servicing
(1) AXLE HOLDER
Hold the axle holder in a vise protected with a piece
of wood or soft jaws to avoid damage.
Do not overtighten the vise.
Tighten the fork bottom socket bolt to the specified
torque.
Torque: 34 N•m (3.5 kgf•m, 25 lbf•ft)
If the socket bolt turns together with the fork
damper, temporarily install the fork spring, spacer
and fork bolt.
(1) OUTER TUBE
You must use the fork set collar for correct oil level
adjustment.
Pour half the required amount of recommended fork
fluid in the fork leg.
Recommended fork fluid:
Honda Ultra Cushion Oil Special (SAE 5W)
Showa SS05 Operation Oil or equivalent
Bleed the air as follows:
1. Extend the fork. Cover the top of the outer tube
with your hand and compress the fork slowly. The
fork fluid will spill out of the oil hole in the slider.
Do not pull up the outer tube more than 225 mm
(8.8 in) from the axle holder to extend the fork.
2. Pump the outer tube and damper rod slowly 8–10
times.
3. Pour additional fluid to the specified capacity and
repeat step 2. Compress the outer tube fully and
leave it for 5 minutes to settle the oil level.
(1) OIL LEVEL
Measure the oil level from the top of the slider.
Standard oil level: 85 mm (3.3 in)
Standard oil capacity: 234 cm
3
(7.9 US oz, 8.2 Imp oz)
(1)
(1)
(1)