HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 213 / 300

7-11
Machine Setting
Spring Identification (1) FORK SET COLLAR (2) DAMPER ROD
Fluid Level Adjustment
Fork fluid level should be checked with the Fork Set
Collar installed.
Remove the fork bolt, spring seat stopper, spring
collar, spring joint plate and spring from the fork
(see fork spring replacement).
Temporarily extend the fork 118 mm (4.6 in) from
the axle holder for the correct oil level adjustment
(page 5-10)
Down the outer tube onto the Fork Set Collar and
leave it few minutes.
Press the damper rod down until it comes into con-
tact with the bottom of the fork tube.
(1) OIL LEVEL
Oil Level Characteristics
Optional Spring Characteristics
Measure the distance between the top of the fluid
and the top of the fork tube.
Standard fluid level:
Right: 106 mm (236 cm
3
)
Left: 101 mm (236 cm
3
)
Recommended fork fluid:
Honda Ultra Cushion Oil Special (SAE5W)
Showa SS05 Operation Oil or equivalent
Fork fluid replacement is required for fork removal
and installation. See section 5 for detail.
Spring rate
Identification
Pre-load
Color
0.60 kg/mm 1 coil 19 mm
0.65 kg/mm
3 coil 20.5 mm
(STD)
0.70 kg/mm – 22 mm
0.70 kgf/mm
0.65 kgf/mm
0.60 kgf/mm
STROKE (mm)
LOAD
（
kgf
）
(1)
(2)
STROKE (mm)
LOAD
（
kgf
）
65 mm
(2.6 in)
165 mm
(6.5 in)
(1)