HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 60 / 300

3-20
Service and Maintenance
(1) PINCH BOLT
Handlebar And Steering Head Bearings
Handlebar
Check the handlebar for bends or cracks.
Check that the handlebar has not moved from its
proper position.
Standard position: Contact with the bottom of top
bridge
Check that the handlebar pinch bolts are torqued to
22 N•m (2.2 kgf•m, 16 lbf•ft).
Steering Head Bearings
Support the machine with its front wheel off the
ground.
Turn the handlebar to the right and left to check for
roughness in the steering head bearings. Stand in
front of the machine and grab the fork (at the axle),
then push the fork in and out (toward the engine) to
check for play in the steering head bearings. If any
roughness or play is felt, adjust or replace the steer-
ing head bearings.
(1) TORQUE ROD
Rear Brake Torque Rod
A floating type torque rod is used for the rear brake.
The rod should be adjusted so that its length is 370
mm (14.6 in).
Standard length: 370 mm (14.6 in)
The standard length refers to the distance between
the centers of the spherical bearing at the ends of the
rod.
(1)
(1)