HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 211 / 300

7-9
Machine Setting
(1) FORK PRELOAD ADJUSTER
(2) REAR SHOCK ABSORBER PRELOAD ADJUSTER
Adjust the suspension stroke using the spring pre-
load adjuster.
If the stroke is shorter than the standard, increase
spring preload.
If the stroke is longer than the standard, decrease
spring preload.
Adjust the fork preload adjuster in one-groove incre-
ments and the rear spring adjuster in one-turn incre-
ment.
(1) REBOUND ADJUSTER
(2) COMPRESSION ADJUSTER
Front Suspension Adjustment
Rebound Damping Adjustment
The adjuster is located at the center of the fork bolt.
Using a flathead screwdriver, turn the adjuster
clockwise to increase damping, counterclockwise to
decrease damping. There are 12 – 16 clicks between
minimum and maximum. Do not force the adjuster
past its limits.
Standard setting: 7 clicks back from maximum
Compression Damping Adjustment
The adjuster is located at the bottom of the axle
holder. Using a flathead screwdriver, turn the
adjuster clockwise to increase damping, counter-
clockwise to decrease damping. There are 12 – 16
clicks between minimum and maximum. Do not
force the adjuster past its limits.
Standard setting: 9 clicks back from maximum
(1) PRELOAD ADJUSTER
Spring Preload Adjustment
Turn the Preload adjuster clockwise to increase pre-
load and counterclockwise to decrease preload.
One complete turn of the preload adjuster corre-
sponds to 1 mm variation in preload.
Adjustment range: 10 – 25 mm (0.4 – 1.0 in)
Standard setting: 18 mm (0.7 in)
The height of the machine will change when spring
preload is changed. You can maintain the correct
ride height with a fork tube adjustment.
Fork Tube Height Adjustment
The fork tubes can be adjusted to maintain correct
ride height when spring preload is changed.
Adjustment range: 0 – 25 mm (0 – 1.0 in)
Standard setting: 15 mm (0.6 in)
(1)
18 mm
(0.7 in)
15 mm
(0.6 in)
(1)
(2)
(1)
(2)