background image

MOTO NZ50 ASSEMBLY INSTRUCTIONS 

 

 
 
 
 
 
 
 
 
 

 

 
 
 
 
 

 

Congratulations, you have purchased a Jialing Honda manufactured MOTO NZ50 – a 
modernised 40 year anniversary model of the legendary Honda SS50 which uses the extremely 
robust Honda ‘C’ series engine design. 

 

Correct assembly, running-in & regular maintenance will ensure many years of safe, reliable & 
economical service.  Do not attempt assembly with only an adjustable crescent wrench or the 
tool kit provided. 

 

All assembly should be to 

hand tight only

 i.e. never force or over-tighten. 

 

 

You will need a metric socket set or ring spanners comprising 8, 10, 12, 14, 15, 16, 17 & 19mm, 
a large 

phillips head

 screwdriver,

 

a 10ml bottle of 243 Loctite and a small quantity of good 

quality general service or machinery grease.  
 

REMOVING FROM CRATE READY FOR ASSEMBLY 

 

The NZ50 arrives in carton covered metal frame crate 84cm H x 45cm W x 158cm L x 102kg. 

 

  

 

Carefully check over the crate for any major external damage – take photos of any damage. 
Immediately notify the delivery person if any external crate damage. Transportation related 
broken or badly damaged parts will be replaced by 

NZ 

M

oto Ltd

.  

 

Cut & remove the packing bands & vertically lift carton off the metal frame.  

 

www.NZmoto.com 

Page 1 of 10 

Содержание MOTO NZ50











Отзывы: