Connect brass brake rod to footbrake lever with supplied small washer & split pin installed on
the side of the brake lever arm nearest the bike.
Remove bolt from muffler support & loosen cylinder head exhaust bolts to allow swinging the
muffler out away from the bike. Remove the right rear footrest bracket. Grease bushing & install
footbrake lever & spacer (which should be closest to the removed 15mm nut but on the inside of
the footrest bracket). Reinstall the right rear footrest bracket & muffler using Loctite.
www.NZmoto.com
Page 6 of 10
small split pin
& washer
Rear brake
light switch
spacer
