HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 171 / 300

5-21
Frame Servicing
(1) SPRING SEAT STOPPERS (2) SPRING SEAT
(3) SPRING GUIDE (4) SPRING
Disassembly
Loosen the spring lock nut and adjuster.
Remove the following:
– spring seat stoppers
– spring seat
– spring guide
– spring
– O-ring
Inspection
Spring
Check the spring for fatigue or damage.
Spherical Bearings
Check the spherical bearings for smooth operation
or damage.
(1) DAMPER ROD (2) MARK
(3) HYDRAULIC PRESS
Damper
Check for oil leakage from the damper rod.
Replace the damper assembly if the oil is leaking.
Mark the damper rod at the first 10 mm (0.4 in)
exposed from the damper body.
Place the damper rod on a scale and measure the
force required to compress the damper until the
10mm (0.4 in) mark is flush with the damper body.
Compression force: 150 - 195 N (15.4 - 20.0 kg)
If the force required is less than 150 N (15.4 kg),
nitrogen is leaking.
Fill the reservoir with 980 - 1,280 kPa (10.0 - 13.0
kg/cm
2
, 142 - 185 psi) of nitrogen gas.
(1) RESERVOIR (2) VALVE CORE
Nitrogen Releasing Procedure
High pressure gas can cause severe injury to
your eyes.
Wear safety glasses and point the valve away
from you when releasing pressure.
Remove the reservoir valve cap.
Release the nitrogen from the reservoir by depress-
ing the valve core until pressure is released.
Before disposal of the rear shock absorber, release
the nitrogen from the reservoir and then remove the
valve core.
10 mm
(0.4 in)
(1)
(2)
(3)
(1)
(2)
(4)
(1)
(2)
(3)