HRC NSF250R 2012, Руководство пользователя и список запчастей

Страница: 210 / 300

7-8
Machine Setting
(1) TY-RAP
(1) O-RING
(1) SUSPENSION STOPS POSITION
(2) TY-RAP (3) O-RING
Suspension stroke is affected by lap times, tire grip,
temperature, and many other factors. Test ride your
machine as close to your racing speed and pattern
as possible.
To get the correct stroke, measure the distance from
the suspension stops to the full stroke position with
your test ride.
Suspension stops are shown in the illustration
above.
Front: from top surface of the axle holder
Right: 9.5 mm (0.37 in)
Left: 14.5 mm (0.57 in)
Rear: Top indicator groove of the damper case
(1) SUSPENSION STOPS POSITION
(2) FULLY STROKE POSITION
Inspect the stroke from stop position.
Set the full stroke position depending upon test runs
so that it is near but not at the stop position.
How To Obtain The Correct Suspension Stroke
As the first step in setting the suspension, be sure to
know the range of the suspension stroke.
For the front suspension, a TY-Rap should be
wrapped around the fork pipe.
On the rear suspension use, the installed O-ring.
(1)
R: 9.5 mm (0.37 in)
L: 14.5 mm (0.57 in)
4.0 mm
(0.16 in)
(1)
(1)
(2)
(1)
(2)
(1)
(1)