•
Administer User Accounts
•
Remote Console Access
•
Virtual Power and Reset
•
Virtual Media
•
Configure iLO Settings
•
Login Privilege
This step defines the privileges that members of the group have for configuring the other members of
the group.
5.
Optional: Enter the
Login Name
and
Password
for a user account on the remote systems you want to
manage.
This information is required if the selected group does not have the Configure iLO Settings privilege on
the remote systems you want to manage.
To enter credentials for multiple remote systems, create a user account with the same login name and
password on each system.
6.
Click
Create Group
.
The group creation process takes a few minutes. The group will be fully populated within the amount
of time configured for the
Multicast Announcement Interval
.
Creating a group from a filtered set of servers
Use this procedure to create an iLO Federation group from a list of filtered servers. For example, you
might want to create a group that contains all servers with a specific version of the iLO firmware.
When you create a group from a list of filtered servers, only the servers listed in the
Affected Systems
list at the time the group is created are added to the group. If you configure servers that meet the filter
criteria after the group is created, they are not added to the group.
Prerequisites
• Configure iLO Settings privilege
• An iLO license that supports this feature is installed.
Procedure
1.
Create a set of systems by using the filters on the
iLO Federation
pages.
2.
Click
iLO Federation
in the navigation tree, and then click the
Group Configuration
tab.
The filters you apply when you create a set of systems are listed at the top of the page. To remove a
filter, click the filter name.
If no iLO Federation groups exist, this page displays the following message:
There are no
configured groups
. Use the
Setup
page to create a group.
3.
Select a group from the
Selected Group
menu.
All of the systems in the selected group that meet the selected filter criteria will be added to the new
group.
4.
Enter the following information:
90
Creating a group from a filtered set of servers
