manualshive.com logo in svg

HP HPE iLO 5, Руководство пользователя

Поделиться
Скачать
HP HPE iLO 5 Скачать руководство пользователя страница 105

Installing license keys (iLO Federation group)

The 

Group Licensing

 page displays the license status for members of a selected iLO Federation group.

Use the following procedure to enter a key to activate iLO licensed features.

Prerequisites

• Configure iLO Settings privilege

• Each member of the iLO Federation group has granted the Configure iLO Settings privilege to the

group.

• The license key is authorized for the number of selected servers.

Procedure

1.

Click 

iLO Federation

 in the navigation tree, and then click the 

Group Licensing

 tab.

2.

Optional: To filter the list of affected systems, click a license type or status link.

3.

Optional: If you install a license key on a server that already has a key installed, the new key replaces
the installed key. If you do not want to replace existing licenses, click 

Unlicensed

 in the 

Status

 section

to install licenses only on servers that are unlicensed.

4.

Enter the license key in the 

Activation Key

 box.

5.

To move the cursor between the segments in the 

Activation Key

 box, press the 

Tab

 key or click

inside a segment of the box. The cursor advances automatically when you enter data into the
segments of the 

Activation Key

 box.

6.

Click 

Install

.

The EULA confirmation dialog box opens.

The EULA details are available in the License Pack option kit.

7.

Click 

OK

.

The 

License Information

 section is updated to show the new license details for the selected group.

More information

iLO licensing on page 214

Servers affected by a license installation

The 

Affected Systems

 section provides the following details about the servers that will be affected when

you install a license key:

•

Server Name

—The server name defined by the host operating system.

•

License

—The installed license type.

•

iLO Firmware Version

—The installed iLO firmware version.

•

iLO Hostname

—The fully qualified network name assigned to the iLO subsystem. To open the iLO

web interface for the server, click the link in the 

iLO Hostname

 column.

•

IP Address

—The network IP address of the iLO subsystem. To open the iLO web interface for the

server, click the link in the 

IP Address

 column.

Click 

Next

 or 

Prev

 (if available) to view more servers in the list.

Installing license keys (iLO Federation group) 

105

Содержание HPE iLO 5




























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды