4.
From the
System Utilities
screen, click
System Configuration
, and then click
iLO 5 Configuration
Utility
.
5.
Select
Yes
in the
Reset iLO
menu.
The iLO 5 Configuration Utility prompts you to confirm the reset.
6.
Click
OK
.
7.
iLO resets and all active connections are ended. If you are managing iLO remotely, the remote console
session is automatically ended.
When you reset iLO, the iLO 5 Configuration Utility is not available again until the next server reboot.
8.
Resume the boot process:
a.
Optional: If you are managing iLO remotely, wait for the iLO reset to finish, and then start the iLO
remote console.
The UEFI System Utilities are open from the previous session.
b.
Press
Esc
until the main menu is displayed.
c.
Click
Exit and resume system boot
.
d.
When prompted to confirm the request, click
OK
to exit the utility and resume the normal boot
process.
Rebooting (resetting) iLO with the server UID button
The UID button on supported servers can be used to initiate a manual reboot of iLO.
For more information about the UID button, see the server user guide.
Performing a graceful iLO reboot with the server UID button
When you initiate a graceful iLO reboot, the iLO firmware initiates the iLO reboot.
Initiating a graceful iLO reboot does not make any configuration changes, but ends all active connections
to iLO. If a firmware file upload is in progress, it is terminated. If a firmware flash is in progress, you
cannot reboot iLO until the process is finished.
Procedure
To initiate a graceful iLO reboot, press and hold the UID button for 5 to 9 seconds.
The UID button/LED flashes blue 4 Hz/cycle per second to indicate that a graceful iLO reboot is in
progress.
Performing a hardware iLO reboot with the server UID button
When you initiate a hardware iLO reboot, the server hardware initiates the iLO reboot.
Procedure
To initiate a hardware iLO reboot, press and hold the UID button for 10 seconds or longer.
358
Rebooting (resetting) iLO with the server UID button
