manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 477 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 477

I

Safety and Regulatory Information

Safety Information

 

Always transport or ship the instrument using the original packaging or
comparable.

 

The instruction manual symbol. The product is marked with
this symbol when it is necessary for the user to refer to the
instructions in the manual.

The CE mark is the registered trademark of the European
Community.

The CSA mark is a registered trademark of the Canadian

Standards Association.

I

This is a symbol of an Industrial Scientific and Medical
Group   Class A product.

The “ON” symbol is used to mark the position of the
analyzer’s line power switch.

The “STANDBY” symbol is used to mark the position of the
analyzer’s power switch.

The AC symbol is used to indicate the required nature of the

line module input power.

11-5

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов