HP 8711C, Руководство пользователя, Страница: 166 / 530

I
Using Instrument Functions
Saving and Recalling Measurement Results
When you save data to a Ele, the analyzer automatically selects a name
for you. Since these names may not be as descriptive as desirable, you may
change the name of the file after it has been saved, or you can save it to a
name of your choice by using the
function. See “Other File
Utilities” later in this chapter for information on how to change a file name.
When saving a file using the function, enter the name
in one of the following ways:
l
Use an external keyboard connected to the analyzer’s rear panel DIN
KEYBOARD connector and type in the filename. (For information on using
a keyboard, see “Using a Keyboard” later in this chapter.)
l
Use the front panel knob and key to point and select
each character of the new Then press Enter .
N O T E
Refer to Chapter 12 at the end of this guide for information on the analyzer’s instrument state
memory allocation.
4-64
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391 Fax:0755-83539691 Website: www.Sengt.com