HP 8711C Скачать руководство пользователя страница 408 | Manualshive

Страница: 408 / 530

HP 8711C Скачать руководство пользователя страница 408

I

Reference

M

M

(MARKER_)

Marker

in more format menu. Displays choices for various magnitude units

for y-axis scale.

Access Keys:

More

in the directory utilities menu. Displays character entry menu for

entry of directory name.

See

Use Directory Utilities” in Chapter 4 for more information.

Access Keys:

[

SAVE RECALL

)

Fils

in (CAL) menu. Compensates for detector drift once when selected.

Recommended setting with external RF source at detectors to coordinate RF
off and zeroing. This key is only available when using internal or external

broadband detectors.

in add max line, add min line, add max point, and add min point

menus. Adds a marker to the data trace and allows it to be moved to identify
trace frequencies and amplitudes.

Access Keys:

Add Limit Add

Add

Line Add

in the CONFIGURE area. Displays menu to set markers, use marker

search and delta markers.

See “Using Markers” in Chapter 4 for more information.

in marker functions menu. Changes the center frequency to that of

the active marker and modifies the frequency span accordingly. If markers
are off, it first turns on marker at its previous setting or at the center
frequency (default).

Access Keys:

9-45

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

«
...
406
407
408
409
410
...
»

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов