manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 160 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 160

Using Instrument Functions

Customizing the Display

Marker Annotation

The marker annotation that appears in the upper right corner of the
display 

can 

be turned on or 

off 

by pressing 

 

 Display

 

 

 

 

  o f f .

Marker Number

The marker numbers that appear above or below the marker symbols,
can be turned on or off by pressing 

 More 

 

 

 

 

 

 .

Y-Axis Annotation

Press (DISPLAY) 

 Display 

 

 

 

 

 to toggle the y-axis annotation and values: in ABS

mode, the absolute value of each horizontal graticule line is indicated; in REL
mode, the value of each horizontal graticule line is indicated relative to the

value of the reference line.

 turn on or off the y-axis annotation, press 

 More Display

 

 

 

 ON off .

limit Test Pass/Fail

Indicator

The limit test pass/fail indicator can be moved to any position on the display
screen. ‘lb move the position of the pass/fail indicator, press 

Limit 

 Limit Options. Use the Limit Icon   

 and

 

   

 

 to position the pass/fail indicator where

desired.

To turn the pass/fail indicator text on or off, press 

 

 

Limit 

 Limit Text 

 OFF.

‘lb enable or disable the display of the limit fail indicator,

!

, press

 

 Limit 

 Limit 

 on OFF.

4-58

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов