manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 260 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 260

I

Automating Measurements

Some of the analyzer features that support automation are built-in and

operate solely on the analyzer; limit testing is one example of a built-in
automated feature. Other features can be executed by programs running on

 (Option 

 or an external computer. Use of automation improves

the productivity of a measurement system by increasing the system’s
throughput. For the discussions in this document, throughput is 

 as

the sum of the following factors:

 operator interaction time

l 

measurement speed

l 

data transfer speed

l 

computation speed (when applicable)

Be sure to consider all of these factors when choosing and setting up an

automated system.

An automated system can perform repetitive tasks quickly and repeatedly.

Automation can be used to direct you through a sequence of tests, to set
instrument parameters, and to send prompts with helpful directions or
diagrams. Automation is also used to collect data, to monitor production

line performance, and to archive and analyze data. Automating your
measurements can help ensure consistent quality on a production line.

Using a consistent, documented production process, while monitoring product
quality are important attributes of modern production standards such as

 These attributes are best achieved with an automated system.

N O T E

Hewlett-Packard offers professional consulting services to help increase your manufacturing productivity

A complete test process analysis can be performed by HP system engineers, who will work with your

factory management, engineering, and production groups to evaluate various automation solutions. For

more information contact the nearest HP sales office. Refer to Chapter 10 for a table of sales and

service offices.

7-3

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов