manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 328 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 328

Automating Measurements

Displaying Measurement Results

 

 

The analyzer has two 

 title lines. One of these lines can be

replaced with a real-time clock readout.

The title line can be set to show the serial number and type of the DUT.
Doing so provides a simple and safe link between the device under test and
the measurement data.

The title and clock lines are, by default, included on hardcopy printouts.

These can be configured using the 

 

 

 menu.

For more details and a simple example, refer to the “Operator Interaction”

section of this chapter.

7-71

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов