manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 469 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 469

N O T E

The actual warranty on your instrument depends on the date it was ordered as well as whether or

not any warranty options were purchased at that time. To determine the exact warranty on your

instrument, contact the nearest Hewlett-Packard sales or service office with the model and serial
number of your instrument. See Table 

 for a list of sales and service offices.

This Hewlett-Packard instrument product is warranted against defects in

material and workmanship for the warranty period. During the warranty

period, Hewlett-Packard Company will, at its option, either repair or replace
products which prove to be defective.

If the warranty covers repair or service to be performed at Buyer’s facility,
then the service or repair will be performed at the Buyer’s facility at no
charge within 

 service travel areas. Outside HP service travel areas,

warranty service will be performed at Buyer’s facility only upon HP’s prior
agreement, and Buyer shall pay HP’s round-trip travel expenses. In all other
areas, products must be returned to a service facility designated by 

If the product is to be returned to Hewlett-Packard for service or repair, it
must be returned to a service facility designated by Hewlett-Packard. Buyer

shah prepay shipping charges to Hewlett-Packard and Hewlett-Packard
shall pay shipping charges to return the product to Buyer. However, Buyer
shall pay all shipping charges, duties, and taxes for products returned to

Hewlett-Packard from another country.

Hewlett-Packard warrants that its software and 

 designated by

Hewlett-Packard for use with an instrument will execute its programming
instructions when properly installed on that instrument. Hewlett-Packard
does not warrant that the operation of the instrument, or software, or
firmware will be uninterrupted or error-free.

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов