manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 326 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 326

I

Automating Measurements

Displaying Measurement Results

The active marker’s value is displayed in the upper right area of the graticule.

If marker bandwidth (or notch) search is selected, the bandwidth (or notch)
information is displayed instead. This marker information can be used to
view exact measured data at critical frequency points. Note the customized

measurement channel notation in Figure   11. In addition to the active
marker’s readout, four of the marker’s values are displayed in the 

area during front panel use. This makes it easy to quickly read the measured

data at several marker positions.

The triangular marker symbols can also be used to graphically indicate critical
frequency points of the measurement. For example, a marker can be set at
the desired center frequency for a notch 

 and the operator can tune the

filter until the notch is at the same frequency as the marker.

Marker search types include:

l 

max 

search

l 

mm 

search

 target search

l 

bandwidth

l 

notch

l 

multi peak

 multi notch

When marker tracking is turned on, these searches will be automatically

performed at the end of each sweep. This can be useful in tuning
applications.

Other marker functions that can be useful are the marker math functions:

 statistics

l 

flatness

l 

RF 

 stats

7 - 6 9

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов