HP 8711C Скачать руководство пользователя страница 404

Страница: 404 / 530

Reference

in limit options menu. Disables the

fail indicator from being

displayed on the analyzer’s screen. Does

disable PASS or FAIL text.

Pass/fail text can be disabled with the Limit Text

See “Customizing the Display” in Chapter 4 for more information.

Access Keys:

in limit options menu. Allows for customizing the position of the

Position

pass/fail indicator and text on the analyzer’s display.

See “Customizing the Display” in Chapter 4 for more information.

Access Keys:

Menu

Limit

in limit options menu. Allows for customizing the position of the

pass/fail indicator and text on the analyzer’s display.

See “Customizing the Display” in Chapter 4 for more information.

Access Keys:

Limit

menu. Displays limit-testing menu to select, display, add,

delete, and edit limit lines and other limit tests.

See “Using Limit Testing” in Chapter 4 for more information.

in limit options menu. When ON, limit lines or points in limit table

are visible on the CRT. Does

not

turn off limit testing-only turns off visible

limit lines or points.

See “Using Limit Testing” in Chapter 4 for more information.

Access Keys:

Limit

9-41

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8711C

Отзывы:

HP 8711C, Руководство пользователя, Страница: 404 / 530

Результаты поиска

Содержание 8711C

Отзывы: