manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 320 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 320

Automating Measurements

Displaying Measurement Results

 

The graticule is the set of grid lines that designate increments of value on the

x-axis and y-axis of the measurement.

 the operator is comparing the trace against limit lines or marker values,

turning off the graticule makes it easier to view the measurement trace, limit

lines, and markers. ‘lb turn the graticule off, press 

 

 

 

 

 or use this SCPI command:

 OFF

where the window number is 1 if in full screen display, and 1 or 2 for the
upper and lower split screen displays.

See Figure   11 for an example of a display with the graticule turned off.

7-63

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов