manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 370 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 370

I

   

 

Reference

A

 

 in 

 menu. Displays menu of measurements suitable for

amplifier measurements: transmission, reflection, and power.

 

 in define graph menu. When annotation is on, printed or plotted

  o f f

hardcopies will contain screen annotation such as the marker readout that
appears in the upper right corner of the display. When off, the screen
annotation is suppressed from the hardcopy.

Access Keys: 

C

HARD 

 

 

 

 

 

 

Graph

 in more display menu. Displays a menu that allows you to customize

the analyzer’s display screen by enabling or disabling annotation for

measurement channel, frequency, and markers.

See “Customizing the Display” in Chapter 4 for more information.

Access Keys: 

 

 

 

 in 

 printer and define plotter menus. 

 paper 

  o f f

feature on and off. Default is on.

Access Keys: 

 

 Printer   

 

 in 

 menu. Scales the data trace vertically to fit within the

graticule area of the display.

 in [CAL) menu. This 

 is only available when using internal or

external broadband detectors. Periodically compensates for external detector

drift due to changes in temperature. When this feature is selected, the
detector(s) are automatically zeroed every five minutes.

C A U T I O N

Do not use 

 with an external source. See 

 

 .

9-7

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов