HP 8711C Скачать руководство пользователя страница 414

Страница: 414 / 530

Reference

in max search menu. Places the active marker at the frequency point

of maximum amplitude. If tracking is off, marker remains at that frequency. If

tracking is on, marker moves to the maximum point with each sweep.

See “Using Markers” in Chapter 4 for more information.

Access Keys:

in min search menu. Places the active marker at the frequency point

of minimum amplitude. If tracking is off, marker remains at that frequency. If
tracking is on, marker moves to the

point with each sweep.

See “Using Markers” in Chapter 4 for more information.

ey in clock format menu. Formats the real-time internal clock to display

time as Month-Day-Year

Access Keys:

(

SYSTEM OPTIONS

)

System

(Option

in the

disk menu.

Allows you to modify the memory allocation on the internal non-volatile RAM

Access Keys:

[

SAVE RECALL

)

printer and define plotter menus. Toggles with

define printer or plotter as one color (black and white) or multi-color.

See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more

information.

9-51

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8711C

Отзывы:

HP 8711C, Руководство пользователя, Страница: 414 / 530

Результаты поиска

Содержание 8711C

Отзывы: