manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 20 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 20

I

   

 

 

After you have unpacked your instrument, it is recommended that you keep
the packaging materials so they may be used if your instrument should need

to be returned for maintenance or repair.

Check the items received against the Product Checklist (included in your
shipment) to make sure that you received everything.

Inspect the analyzer and all accessories for any signs of damage that may
have occurred during shipment. If your analyzer or any accessories appear

to be damaged or missing, call your nearest Hewlett-Packard Sales or Service

office. Refer to Table 

 in Chapter 10 for the nearest office.

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов