manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 430 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 430

I

I

   

 Reference

S

 in Save 

 menu. Selects measurement channel 2 data to be

 

saved as 

 data. This data can be imported into a spreadsheet or word

processing program.

See “Saving and Recalling Measurement Results” in Chapter 4 for more

information.

Access Keys: 

(

SAVE RECALL

) 

 

Save 

 

(Option 

 

 

 

 in programs menu. Saves the current

program to memory or disk.

See 

the 

 Instrument BASIC User’s Handbook 

for more information.

Access Keys: 

(

SAVE RECALL

] 

 

 in SYSTEM area of front panel. Displays menus to save, title, 

and recall states and programs; rename, delete, and copy files; and select,
configure, and format disks.

See “Saving and Recalling Measurement Results” in Chapter 4 for examples.

 

in (

SAVE RECALL

) 

menu. Saves information to memory or disk,

automatically naming the 

 

See “Saving and Recalling Measurement Results” in Chapter 4 for more

information.

 

 in CONFIGURE area of front panel. Allows changing of scale

per division, and reference level and position for 

 viewing of

measurements. Also accesses reference tracking function.

See “Entering Measurement Parameters” in Chapter 2, and “Using Reference

Tracking” in Chapter 4 for more information.

 in 

 menu. Sets the value of vertical divisions of graticule. For

example, if the 

 is 10 

 each graticule line is 10 

 higher than the

one below.

9 - 6 7

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов