manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 470 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 470

Specifications and Characteristics

Warranty

   

The foregoing warranty shall not apply to defects resulting from improper or
inadequate maintenance by Buyer, Buyer-supplied software or interfacing,
unauthorized modification or misuse, operation outside of the environmental
specifications for the product, or improper site preparation or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. 
PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

 

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE

REMEDIES. HEWLETT-PACKARD SHALL NOT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

10-19

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов