manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 303 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 303

Automating Measurements

Automated Measurement Setup and Control

 

 

 

A DUT will often undergo several different tests while at a single test station.
The analyzer’s parameters (such as sweep frequencies, output power,

markers, and limits) must be set to the desired values before each test is

done. In an automated test system the controlling computer modifies the
instrument settings for the operator. The analyzer offers several techniques
for quickly changing the instrument’s measurement parameters:

l 

Recall of instrument states from disk

l 

The learn string HP-IB command (*LRN)

l 

SCPI commands that change specific parameters

Recalling Instrument

The analyzer has two built-in memory (RAM) disks, 

 RAM Disk” and

States From Disk

“Volatile RAM Disk”. In addition, the analyzer has a built-in 3.5” floppy disk

drive accessible on the front panel. A “RAM Disk” is a block of memory
inside the analyzer which you can access in the same way that you access

 on a floppy disk.

The 

 RAM Disk” is non-volatile, meaning that its contents are

preserved while the analyzer is turned off. The contents of the “Volatile RAM
Disk” are erased when the analyzer is turned off. The Volatile RAM Disk can

be configured to be much larger than the 

 RAM Disk, allowing it to

hold many more instrument states.

For all three types of disk, the instrument settings and calibrations associated
with several tests can be saved to instrument state 

 The instrument

states can later be recalled during the test sequence. The advantage of using

RAM disks rather than the 3.5” floppy disk is that recalling a state from RAM
Disks takes several seconds less than recalling a state from the floppy disk.

For example, suppose the instrument settings are entered for the third test of

a sequence of tests. The instrument settings can be saved in a file with the

name 

 on the 

 RAM Disk. When the third test must

be performed, the control program can recall the instrument state from the

non-volatile RAM disk with this SCPI command:

MMEM:LOAD:STATe 

7-46

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов