HP 8711C Скачать руководство пользователя страница 172

Страница: 172 / 530

Using Instrument Functions

Saving and Recalling Measurement Results

To Delete a File

To Copy a File

Highlight the

to be deleted by using the front panel knob or the

keys.

Press

File YES

‘lb delete all

within the current directory, press

YES.

Highlight the

to be copied by using the front panel knob or the

keys.

Press

File and then select the destination disk for the file to be

copied. You will then be given the opportunity to edit the destination

name if you wish.

Use a keyboard (if connected) or the front panel knob and the

enter the destination filename.

C A U T I O N

There will be no warning from the analyzer if the destination

already

exists. It will be overwritten without warning. For instance,

STA

on the internal memory disk and

. STA on a floppy disk in the

built-in disk drive may contain completely different sets of data. If you copy

one of those files to the other without editing the

name, the

will be

overwritten with the source file.

To copy the file press Enter .

lb copy all the

in the current directory, press

All Files and

then select the destination disk for the files to be copied.

6. You will then be prompted to tell the analyzer where on the destination

disk to put the

to be copied.

Press

if you want the

to go into the main, or root, directory of

the destination disk. Use a keyboard (if connected) or the front panel knob
and the

to enter a subdirectory on the destination disk before

pressing Enter .

4-70

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8711C

Отзывы:

HP 8711C, Руководство пользователя, Страница: 172 / 530

Результаты поиска

Содержание 8711C

Отзывы: