HP 8711C Скачать руководство пользователя страница 382

Страница: 382 / 530

Reference

Graph

Define

Printer

Access Keys:

(

SYSTEM OPTIONS

)

System

in set pen numbers menu. Resets plotter pen number assignments to

their default values.

See

the Printer or Plotter Settings” in Chapter 4 for default values.

Access Keys:

Set Pen

hardcopy menu. Displays menu to

which parts of the

graph are to be printed or plotted: trace data, graticule, annotation, marker

symbol, title and clock, or combinations.

See “Printing and Plotting Measurement Results” in Chapter 4.

Access Keys:

[

HARD

menu. Displays menu to

the hardcopy in terms

of information to be copied. Default setting is

See “Printing and Plotting Measurement Results” in Chapter 4.

in (HARDCOPY_) menu. Displays menu to

printer in

terms of color, orientation, autofeed, and margins.

See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more

information.

in [HARDCOPY) menu. Displays menu to define the plotter in terms of

color, pen numbers, and autofeed.

See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more

information.

in (HARDCOPY) menu. Displays menu to

the printer in terms of

color, orientation, autofeed, resolution, and margins.

See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more

information.

9-19

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 8711C

Отзывы:

HP 8711C, Руководство пользователя, Страница: 382 / 530

Результаты поиска

Содержание 8711C

Отзывы: