manualshive.com logo in svg

HP 8711C, Руководство пользователя, Страница: 390 / 530

Поделиться
Скачать
HP 8711C Скачать руководство пользователя страница 390

I

F i l e

Fine

15 

Flatness

Binary format, however, is required if you are going to use
the 

 keyword.

See 

the 

HP 8711 

 Instrument BASIC User’s Handbook 

for more

information on saving programs.

Access Keys: 

 

RECALL

] 

 

in 

 

RECALL

] 

menu. Displays menu to rename, delete, or copy

 format disk or memory; and change or make directories.

See “Other File Utilities” in Chapter 4 for more information.

 in 

 menu. This key is used to set up the analyzer for

transmission or reflection measurements of 

See “Using the (BEGIN) Key to Make Measurements” in Chapter 3 for more

information.

 in system bandwidth menu. This is the narrowest system bandwidth

available. (Medium wide is the default system bandwidth.)

See Chapter 5, “Optimizing Measurements,” for information on how system

bandwidth can affect your measurements.

Access Keys: 

 System 

 in marker math menu. Calculates the flatness of a user-defined trace

segment.

See “lb Use Marker Math Functions” in Chapter 4 for more information.

Access Keys: 

 

 

 

 Rath

 in the CONFIGURE area. Pressing this key displays a menu of

choices for the display format of your measurement.

The choices available are: Log Mag, Lin Mag and SWR. For more information
on each of these choices, see its entry in this chapter.

9 - 2 7

深圳市盛腾仪器仪表有限公司

Tel:0755-83589391

Fax:0755-83539691

Website: www.Sengt.com

Содержание 8711C



















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов